Jeep Drivetrain Parts

DANA 27 Lock-Right Locker

For Standard Open Differentials Only.

4spd Shift Ball Insert (T-4/T-176)

Fits:Jeep CJ (1980-1986) w/ T176 or T177 Transmission.Jeep CJ (1982-1986) w/ T4 Transmission.Jeep Cherokee (XJ) (1984-1986) w/ T4 Transmission.Jeep SJ & J-Series (1980-1986) w/ T177 Transmission.

DANA 300 Master Rebuild Kit

Includes Bearings, Seals, Gaskets and Fork InsertsFits:

'83-'86 CJ Clutch Slave Cylinder (AMC 150)

Fits: Jeep CJ (1983-1986) w/ 2.5L 150 AMC engine. Jeep Cherokee (1984-1986). 4 cylinders only

'80-'83 CJ Clutch Slave Cylinder (GM 151)

Fits: Jeep CJ (1980-1983) w/ 2.5L GM engine. Jeep CJ (1980-1986) w/ 4.2L 258 engine

'80-'86 4-Cyl CJ Clutch Master Cylinder

Fits: Jeep CJ-5 (1980-1983) w/ LHD; w/ GM 2.5L engine.

'76-'86 CJ Clutch Linkage Kit

Fits:Jeep CJ (1976-1986)Kit Includes: Bellcrank, Clutch Fork Rod, Adjuster, Bracket & Pivots, Pedal Shaft Rod, Out

'90-'95 YJ Dana 30 Right Axle Assy with ABS

Axle Shaft Assembly for Dana 30 w/ Disconnect, Right with ABS, 1987-1995 Wrangler

T-176 Mainshaft

Fits: Jeep CJ-5 (1980-1983) w/ T176 Transmission.

T-4/5 Mainshaft (w/o 1st Gear Needle Bearings)

FOR USE WITH MODEL WITHOUT 1ST GEAR NEEDLE BEARING Fits:Jeep CJ (1982-1986) w/ T4 or T5 Transmission.Jeep SJ & J-Series (1982-1986) w/ T5 Transmission.Jeep Cherokee (XJ) (1984-1986) w/ T4 or T5...

76-79 Jeep CJ5 CJ7 3spd Input Shaft for T-150

Input Shaft; 9-5/8″ Long; 10 Splines; 1.0625″ Spline Diameter; 20 Teeth 

AMC 20 Inner Pinion Bearing

Inner Pinion Bearing (AMC 20), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

'50-'71 CJ Dana 44 Inner Rear Output Axle Shaft Cup

Dana 20 Trans Case Inner Rear Output Shaft Bearing Cup Inner Rear Output Shaft Cup for Dana 44 with Tapered Axles,1950-1971 Models

'50-'71 CJ Dana 44 Inner Rear Output Axle Shaft Bearing

Inner Rear Output Shaft Bearing for Dana 44 with Tapered Axles,1950-1971 Models

Dana 35 Ring & Pinion (4.56 ratio) 41X9 Teeth

Ring/Pinion 4.56 1987-2007 Jeep Wrangler (YJ,TJ,JK), Cherokee (XJ) with Dana 35 By Omix-ADA

Dana 35 YJ/TJ Ring/Pinion Kit (4.11)

Fits:Jeep Wrangler (YJ) (1987-1995) w/ Model 35 Rear Axle; 4.11 Ratio (37-9).Jeep Wrangler (TJ) (1997-10/1/2000) w/ Model 35 Rear Axle; 4.11 Ratio; (42119/42722).Jeep Cherokee (XJ) (1986-1996) w/...

'87-'93 YJ Dana 35 Ring & Pinion (3.55)

Fits:Jeep Wrangler (YJ) (1987-1993) w/ Model 35 Rear Axle; 3.55 Ratio (39-11) (42469/42725).Jeep Cherokee (XJ) (1986-1993) w/ Model 35 Rear Axle; 3.55 Ratio (39-11) (42469/42725).Jeep Grand Cherokee...

Dana 35 Ring & Pinion (3.07)

Fits:Jeep Wrangler (YJ) (1987-1995) w/ Model 35 Rear Axle; 3.07 Ratio (43-14); OE Bolt length .81".

AMC 20 & DANA 35 Yoke Pinion Nut (Front)

Fits Jeep: Jeep Wrangler (JL) (2018-2024) w/ Dana 30 Front Axle.

82-86 Jeep CJ T4 T5 Input Shaft (10 spline)

Input Shaft with 10 Splines Fits:

Dana 30 Inner Pinion Bearing Set

Fits Jeep: Jeep Wrangler (JL) (2018-2024) w/ Dana 30 Front Axle; 186mm Outer Pinion Set.

DANA 300 Rear Output Shaft Inner Bearing

Rear Output Bearing; Front (Farthest From Yoke) Fits:

'80-'81 CJ (6/8cyl) 10.5" Master Clutch Kit

Fits:Jeep CJ (1980-1981) w/ 4.2L or 5.0L engine; 10-3/8″ x 1-1/8″ 10 Spline; Includes Pressure Plate, Disc, Throwout Bearing, Pilot Bearing and Clutch Fork.

Dana 35 Differential Shim Kit

This Dana 35 differential shim kit from Omix-ADA fits 84-01 Jeep Cherokees, 93-98 Grand Cherokees, and 87-07 Wranglers.

'76-'86 CJ AMC 20 Ring & Pinion (4.56)

Ring and Pinion (AMC 20), 4.56 Ratio (41x9 Teeth), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

AMC 20 Ring & Pinion (4.10)

Gear & Pinion; 4.10 Ratio Fits:

AMC 20 Ring & Pinion (3.54)

Gear & Pinion; 3.54 Ratio Fits:

Dana 44/25/27 Outer Pinion Bearing / Cup

Fits Front Axle:Jeep CJ (1976-1986) with Model 30 Front Axle.Jeep Wrangler (YJ) (19

T-4/5 Input Shaft Seal

Fits:Jeep CJ (1966-1984) w/ T18 Transmission.Jeep CJ (1982-1986) w/ T4 or T5 Transmission.Jeep C101 Commando (1966-1971) w/ T18 Transmission.Jeep Cherokee (XJ) (1984-1986) w/ T4 or T5 Transmission...

T-176 / T-150 Input Shaft Seal

Fits:Jeep CJ (1966-1967) w/ T86 Transmission.Jeep CJ (1967-1972) w/ T14 Transmission.Jeep CJ (1971-1975) w/ T15 Transmission.Jeep CJ (1976-1979) w/ T150 Transmission.Jeep CJ (1980-1983) w/ SR4...

'76-'79 CJ (6/8cyl) 10.50" Master Clutch Kit

Includes Clutch Disc, Pressure Plate, Throwout Bearing, Pilot Bearing and Clutch Fork; 10-1/2″ Disc; 10 Splines; 1-1/6″ (1.0625″) Spline Diameter 

YJ Dana 30 Ring & Pinion (4.56) (41X9)

Ring and Pinion for Dana 30 w/ Disconnect, 4.56 Ratio (41 x 9 Teeth), 1984-1991 Cherokee, 1987-1995 Wrangler

Dana 30 Ring & Pinion (4.27)

Ring and Pinion Kit for Dana 30, 4.27 Ratio (47 x 11 Teeth), 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

'72-'86 CJ Dana 30 Ring & Pinion (4.56 Ratio)

4.56 RATIO (41X9 TEETH ) Ring and Pinion Kit for Dana 30, 4.56 Ratio (41 x 9 Teeth), 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

'77-'86 CJ Dana 30 Ring & Pinion (4.10)

Gear & Pinion; 4.10 Ratio Fits:

Dana 30 CJ Ring & Pinion 3.73

Ring and Pinion Kit for Dana 30, 3.73 Ratio (41 x 11 Teeth), 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

Dana 30 Ring & Pinion Kit (3.54)

Ring and Pinion Kit for Dana 30, 3.54 Ratio (46x13 Teeth), 1972-1983 CJ5, 1972-1975 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

80-86Jeep CJ T176 Input Bearing Retainer

Front Bearing Retainer w/ Transmission 5359389 or 5359390; O/A Length 3-3/4″. Fits: Jeep CJ-5 (1980-1983) w/ T176 Transmission. Jeep CJ-7 (1980-1986) w/ T176

82-86 Jeep CJ T4 / T5 Input Bearing Retainer

Fits Jeep: Jeep Cherokee (XJ) (1984-1985) w/ T4 or T5 Transmission.

80-86 Jeep CJ5 CJ7 CJ8 DANA 300 T-Case Yoke Seal (front or rear)

Fits: Jeep CJ-5 (1980-1983) w/ Dana 300 Transfer Case.