'82-'86 Jeep CJ (6/8cyl) 10.5" Master Clutch Kit

Includes Clutch Disc, Diaphragm Style Pressure Plate, Clutch Release Bearing, Pilot Bearing and Clutch Release Fork; 10.5″ Clutch Disc; 10 Splines; 1.125″ Spline Diameter. Fits: Jeep CJ-5 (1982-1983) w/ 4.2L engine Jeep CJ-7...

'82-'86 CJ Driver Front Brake Hose

Jeep CJ (1982-1986) - CJ-7 or CJ-8 - Left.

'81-'86 CJ 258 Fuel Filter to Carb Inlet Steel Line

'81-'86 CJ 258 Fan Spacer

1980-84 Jeep CJ Laredo Decal Kit

Kit Contents: Part #8084JLR(plus color code) 2 "Laredo" Hood Names 2 "Jeep" Fender Names 1 Hood Stripe 3 Grill Stripes (set) 2 Front Wheelwell Stripes 4 Lower Body Stripes 2 Rear Wheelwell Stripes 2 Rear Bed...

'80-'81 CJ (6/8cyl) 10.5" Master Clutch Kit

Fits:Jeep CJ (1980-1981) w/ 4.2L or 5.0L engine; 10-3/8″ x 1-1/8″ 10 Spline; Includes Pressure Plate, Disc, Throwout Bearing, Pilot Bearing and Clutch Fork.

'80-'86 CJ7 Diamond Plate Shifter Cover

Our Shifter Covers are a direct factory replacement to original mounting holes with no drilling required.  The covers do not include the rubber gearshift boots. Cover has cutout for Dana 300 transfer case, but no cutout for the transmission...

'80-'86 CJ Diamond Plate Shifter Cover

Our Shifter Covers are a direct factory replacement to original mounting holes with no drilling required.  The covers do not include the rubber gearshift boots. Fits SR4, T4, T5 & Dana 300.   Direct Factory Replacement Uses Original...

Dana 35 Differential Shim Kit

This Dana 35 differential shim kit from Omix-ADA fits 84-01 Jeep Cherokees, 93-98 Grand Cherokees, and 87-07 Wranglers.

'76-'86 CJ AMC 20 Ring & Pinion (4.56)

Ring and Pinion (AMC 20), 4.56 Ratio (41x9 Teeth), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

AMC 20 Ring & Pinion (4.10)

Ring and Pinion (AMC 20), 4.10 Ratio (41x10 Teeth), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

AMC 20 Ring & Pinion (3.54)

Ring and Pinion (AMC 20), 3.54 Ratio (39x11 Teeth), 1976-1983 CJ5, 1976-1986 CJ7, 1981-1986 CJ8

80-86 DANA 300 Rear Output Shaft for CJ5 CJ7 CJ8

This replacement transfer case rear output shaft fits 80-83 CJ5, 81-86 CJ7 and 81-86 CJ8 Scrambler models equipped with Dana 300 transfer cases. Measures 8.75-inches in length. Replaces OE 8133793 Direct replacement Transfer Case Rear Output Shaft...

Dana 44/25/27 Outer Pinion Bearing / Cup

Fits Front Axle:Jeep CJ (1976-1986) with Model 30 Front Axle.Jeep Wrangler (YJ) (1987-1995) with Model 30 Front Axle.Jeep Cherokee (XJ) (1984-1999) with Model 30 Front Axle.Jeep SJ & J-Series (1974-1991) with Model 44 Front Axle.Fits Rear Axle:Jeep...

T-4/5 Input Shaft Seal

Fits:Jeep CJ (1966-1984) w/ T18 Transmission.Jeep CJ (1982-1986) w/ T4 or T5 Transmission.Jeep C101 Commando (1966-1971) w/ T18 Transmission.Jeep Cherokee (XJ) (1984-1986) w/ T4 or T5 Transmission.Jeep SJ & J-Series (1966-1984) w/ T18 Transmission...

T-176 / T-150 Input Shaft Seal

Fits:Jeep CJ (1966-1967) w/ T86 Transmission.Jeep CJ (1967-1972) w/ T14 Transmission.Jeep CJ (1971-1975) w/ T15 Transmission.Jeep CJ (1976-1979) w/ T150 Transmission.Jeep CJ (1980-1983) w/ SR4 Transmission.Jeep CJ (1980-1986) w/ T176 or T177 Transmission...

97-06 Jeep TJ Wrangler 4pc 7" Extended Fender Flare Kit

Four piece set with 7" wide front and rear flares with install hardware.

'76-'86 CJ Safari Sport Rack

This is one tough rack from Warrior Products!  Black powder coated steel construction handles a hefty 400 lbs. of cargo.  Rack basket utilizes snapper pin disconnects to allow quick basket removal for hauling stuff like canoes or lumber. ...

'76-'86 CJ Rear 1/2" LIft & '87-'95 YJ 0" Front Lift Shackles (Gray)

These MIG-welded, jig-built, spring shackles come complete with all the mounting hardware required for an easy installation.  Shackle Kits lift one end of the vehicle from ½" up to 2½", depending on the application.  Kits come in...