1976-86 Jeep CJ5 CJ7 CJ8 JEEP Embossed Front Frame Cover - Replaces OE 5762341

(No reviews yet) Write a Review
Limited Quantity
5.00 LBS
30.00 (in)
10.00 (in)
5.00 (in)
Maximum Purchase:
10 units
Calculated at Checkout

Bulk discount rates

Below are the available bulk discount rates for each individual item when you purchase a certain amount

Buy 2 - 3 and get 5% off
Buy 4 - 10 and get 10% off
  • 1976-86 Jeep CJ5 CJ7 CJ8 JEEP Embossed Front Frame Cover - Replaces OE 5762341
  • 1976-86 Jeep CJ5 CJ7 CJ8 JEEP Embossed Front Frame Cover - Replaces OE 5762341
  • 1976-86 Jeep CJ5 CJ7 CJ8 JEEP Embossed Front Frame Cover - Replaces OE 5762341



Licensed Mopar Factory Replacement 1976-1986 Jeep CJ5, CJ7 & CJ8 "JEEP" Embossed Frame covers by KeyParts. Replaces OE 5762341. CBJEEP is the KeyParts SOLE DISTRIBUTOR of this frame cover.
1980: Accessory item
1976-77: Requires some cutting / modification
1976-80: Will require drilling 4 holes for 3/16" self-tapping screws with oversized washers
1980-86: Seamless fit
Key Parts, Inc. has been the leading developer and distributor of die stamped rust repair panels in North America. Key Parts is the standard for quality and offers over 4,000 items to help with your repair or restoration. Please CLICK HERE to view all KeyParts replacement parts for Jeep CJ & Wrangler.
The frame covers are made from Polypropylene mixed with EPDM, which acts as an elastomer, plus a UV protectant. The EPDM is in the PP beads in talc form so that the product has flexibility. PP alone would easily crack or break. This is a formula used in automotive applications like a front fascia (It can bend without breaking).The PP comes in small beads which are forced into the injection mold at a pressure high enough to liquify the plastic. Once it's injected the tool rests long enough for the plastic to solidify and the finished product is removed from the mold. Material is hard plastic like the Mopar style; NOT like the early soft AMC style.
FOR INTERNATIONAL SHIPPING please CLICK HERE to order from our eBay store.
CLICK HERE to watch the install video.
Frame cover install tips & tricks from CBJEEP:
1. Start screws by hand (one side at a time)
2. Use 3/16 self-tapping screws w/ washer
3. Run them in about halfway because you still want them to move, so you can repeat the step 1 process on the other side
4. IT FITS TIGHT (exactly like the factory frame covers) – push cover and roll it over by hand for a seamless fit (press hard)
5. This is right about the point where you realize calling over an extra set of hands might be useful to finish the job
6. Once all (4) of the self-tapping screws are turned in about 50% by hand, you’ll be ready to run them in all the way
Frame cover install tips & tricks from our customers:
1. Loosely screw in both bolts on one side first
2. Then insert a deep well socket (13mm Craftsman 1/4" will do the trick) through the hole above the forward screw slot and into the corresponding frame hole
3. Push down gently until the forward slot allows the screw passage to the frame, then thread the screw in enough to hold
4. There will now be allowance for the remaining screws to all thread in
Actual Box Dimensions:
29.75" x 9.25" x 4.25"
If you're looking to place an order for a quantity of 10 or more, please give us a call at 972-442-6189 to place your order.
View AllClose